Honeywell VisionPRO 8000 Product Data page 9

CONVENTIONAL
C
K
RC
R
U1
U1
U2
U2
HEAT PUMP
Fig. 13. Thermostat wired directly to equipment.
1. Power the thermostat using Rc and C terminals. Refer to
Fig. 14.
CONVENTIONAL
C
K
RC
R
U1
U1
U2
U2
HEAT PUMP
Fig. 14. Inserting wires in thermostat terminal block.
S1 S1
S1 S1
W O/B
Y Y
G G
W2 AUX
-E
Y2
Y2
A
L/A
S1 S1
S1 S1
W O/B
Y Y
G G
W2 AUX
-E
Y2
Y2
A
L/A
9
Mounting Thermostat on Wallplate
1. Align thermostat at bottom and snap into place as
shown.
Fig. 15. Mount thermostat.
Finding Your Password (Date Code)
to Access Installer Options
You need a password (Date Code) to access Installer Options.
Installer Options allow you to:
• Make changes to the Installer Setup.
• Perform an Installer Test.
• Reset the thermostat to Factory Default settings.
The password (Date Code) is located on the back of the
thermostat. It can also be found by following these steps:
1. Touch Menu.
2. Select Dealer Information.
Dealer Information
Installer Options
3. Scroll down to see the Date Code.
TH8321WF1001
Date Code:
®
VISIONPRO 8000 WITH WI-FI
MCR34022
Fig. 16.
1524
MCR35348
Fig. 17.
33-00096—01
®