Honeywell VisionPRO 8000 Product Data page 38

®
VISIONPRO 8000 WITH WI-FI
Connect to a hidden Wi-Fi
1. Touch MENU, then Wi-Fi Setup.
2. Touch Other, then Select.
3. When prompted, press the screen to edit the network
name.
4. Enter the network name.
Press the or buttons to change the letter or
 
number. Press the
character, or the
character. Use the

change letter case. Press Done when complete.
5. Select the appropriate network security setting, then
press Select.
6. Enter the Wi-Fi network password as explained above in
"Connecting to Wi-Fi Network", step 6.
Unsuccessful Wi-Fi connection
If you are unsuccessful in connecting the thermostat to the
Wi-Fi network, you will see a Connection Failed screen. Press
button for other tips about this failed connection. Here are

three specific reasons the connection might be unsuccessful.
For all Connection Failed screens, pressing Done will return to
the Menu screen.
Invalid Password
The password you entered is invalid. Check that you have the
right password and try again.
No IP Address
The thermostat was unable to obtain an IP address from the
router. Verify the router is correctly set up to automatically
assign IP addresses. This connection can take several
minutes. If there is still no connection, remove the thermostat
from the wallplate for 10 seconds, then snap it back into place.
No Internet Link
The thermostat connected to the Wi-Fi network but was unable
to establish a connection to the internet. Check the router
settings and try again. Make sure the Ethernet cable is plugged
into the router and try rebooting the router if necessary.
33-00096—01
®
®
network
button to move to the next
button to move to the previous
or buttons at the bottom to

DoaIol Inrol Madorl
Enter Network Name
Delete
AC
38
Wi-Fi Setup
Installer Options
M35352
WirelessNetwork
Other...
M35353
Press Here to Edit
M35354
Space
M35346
SSID Security
Open Network
M35355