Honeywell VisionPRO 8000 Product Data page 80

®
VISIONPRO 8000 WITH WI-FI
4. Touch
or to select the Heat and Cool temperatures.
 
Temperature
During Holiday
5. Review the settings and touch Done to save them. Touch
Cancel to ignore changes.
Setting Holiday Override:
Commercial Use
This feature lets you customize temperature settings to be
maintained from now until a specified date. The thermostat
resumes normal scheduling on the date you select.
1. Touch MENU.
2. Select Holiday Mode to display Temperature While Away.
Holiday Mode
Equipment Status
3. Touch or to select the Heat and Cool temperatures,
 
then touch Next to select return date.
33-00096—01
®
MCR34121
Fig. 211.
MCR34100
Fig. 212.
MCR34122
Fig. 213.
Temperature
While Away
4. Review the settings and touch Done to save them. Touch
Cancel to ignore the changes.
NOTE: The cool temperature can only be set higher than
the unoccupied program setting and the heat tem-
perature can only be set lower than the unoccu-
pied program setting.
Initiating Occupancy Mode:
Commercial Use
This feature keeps temperature at an energy saving level until
you touch Press HERE to Start Occupancy. When you arrive,
touch the message to maintain a comfortable temperature
while the room is occupied.
Press
Start Occupancy
Touch the or buttons to set the temperature or the Hold
 
Until time. The temperature is maintained until the time you set.
Temperature returns to an energy-saving level after the timer
expires, or the "Occupied" period ends.
NOTE: This feature is available only when programmed
by the installer.
80
MCR34123
Fig. 214.
HERE to
M34127
Fig. 215.