Honeywell VisionPRO 8000 Product Data page 35

ISU Installer Setup
Number Name
1014 Vent During Hum Yes
or Dehum Calls
No
1016 Vent On High
Off
Indoor Humidity
On
1017 Ventilator Core Off
Reminder
3, 6, 9, 12 Calendar Months
1017 Ventilator Filter Off
Reminder
3, 6, 9, 12 Calendar Months
1100 Number of UV 0, 1, 2
Devices
1105 UV Bulb 1 Off, 6, 12, 24 Calendar Months
Reminder
Note: "1" is not
displayed if there
is only 1 UV Bulb
1105 UV Bulb 2 Off, 6, 12, 24 Calendar Months
Reminder
1200 Custom
View / Edit Custom Reminders
Reminders
Add Custom Reminders
28 Backlighting On Demand
Continuous
1400 Clock Format
12 hour
24 hour
1401 Daylight Saving
Off
Time
On
Table 2. Installer Setup (ISU) Table. (Continued)
Settings Default
Yes
On
Off
Off
0
Off
Off
None
On Demand
12
On
Residential,
Commercial
or Both
Both This feature is used to help reach the user's
desired humidity level by not allowing the
ventilation equipment to run during a call for
humidification or dehumidification.
Yes: Ventilation is allowed to run during a call
for humidification or dehumidification.
No: Ventilation is NOT allowed to run during a
call for humidification or dehumidification.
Both This ISU is only displayed when ISU 1000
Ventilation Type is set to ERV / HRV.
Off: The humidity level has no effect on
ventilation.
On: The thermostat removes excess humidity
by turning on the ventilator when the indoor
humidity rises 10% above the user's
humidification setting. The thermostat must be
in the heat mode to ventilate on high humidity.
Both Ventilator Core Cleaning Reminder
Both Ventilator Filter Cleaning Reminder
Both Press the up/down arrows to select the number
of UV devices installed in the system. Some
systems may have two UV devices, one for the
A-Coil and another for Air Treatment. A
replacement reminder can be setup for each
one. Select 0 if no UV devices are installed.
Both UV Bulb 1 Replacement Reminder
Both UV Bulb 2 Replacement Reminder
Both See "Customizable Reminders" beginning on
page 73.
Both Select Continuous or On Demand backlighting.
Select Continuous backlighting if you would like
the backlight to be on all the time.
Select On Demand backlighting if you would like
the backlight to only turn on after a key press.
After you complete your changes, the screen
stays lit for 45 seconds.
Both
Both Set to Off in areas that do not follow Daylight
Saving Time.
35
®
VISIONPRO 8000 WITH WI-FI
Notes
33-00096—01
®