Honeywell VisionPRO 8000 Product Data page 7

ALTERNATE MOUNTING LOCATION
FOR DISCHARGE SENSOR.
DEHUMIDIFIER
Fig. 5.
VENTILATOR
OR
DEHUMIDIFIER
Fig. 6.
MOUNT
DISCHARGE
SENSOR HERE
ABOVE CENTER
OF A-COIL
UPSTREAM OF
DEHUMIDIFIER
HEAT
EXCHANGER
BLOWER
M35770
MOUNT
DISCHARGE
BYPASS
SENSOR HERE
HUMIDIFIER
HEAT
EXCHANGER
BLOWER
M35771
BYPASS
HUMIDIFIER
VENTILATOR
OR
DEHUMIDIFIER
Installing Discharge Air Temperature
Sensor
Use the following steps to mount the Discharge Sensor:
1. Attach plastic cover to the sensor probe.
2. Drill 1/4-inch hole for the sensor probe and mount it to
the ductwork with enclosed screws (see Fig. 8).
3. Connect wires to S1 terminal at the thermostat.
4. Setup the S1 terminal in the Installer Setup at the ther-
mostat.
Fig. 8. Mounting Discharge Air Sensor.
7
®
VISIONPRO 8000 WITH WI-FI
MOUNT
DISCHARGE
SENSOR HERE
HEAT
EXCHANGER
BLOWER
M35772
Fig. 7.
M32995
33-00096—01
®