Operation - Honeywell VisionPRO 8000 Product Data

With wi-fi
Hide thumbs Also See for VisionPRO 8000:
Table of Contents

Advertisement

®
VISIONPRO
8000 WITH WI-FI
MOUNTING C7089U1006 WIRED OUTDOOR
TEMPERATURE SENSOR
Do not mount the sensor:
• in direct sunlight.
• where hot or cold air blows on the sensor. Discharge line
from an outdoor compressor unit, vent or fan causes
inaccurate temperature readings.
• where snow, ice or debris can cover it.
Use the following steps to mount the sensor:
1. Remove the sensor from the mounting clip.
2. Mark the area on the location selected for mounting the
sensor mounting clip.
3. Mount the clip.
4. See "Wiring C7089U1006 Outdoor Sensor" on page 87.

OPERATION

NOTE: The screen lights when you press any button. After you complete your changes, the screen stays lit for 45
seconds. Depending on how your thermostat was installed, the screen light may always be on.
33-00096—01
®
Fig. 28. Quick reference to residential display.
Fig. 27. Typical locations for C7089U1006 Outdoor Sensor.
HOME. Touch to display Home screen.
FAN. Select fan mode.
SYSTEM. Select system mode (Heat/Cool).
MENU. Touch to display options. Start here to set a
program schedule.
Current status. Shows system mode (heat/cool),
outdoor temperature (with optional outdoor sensor
®
or Wi-Fi
connection) and humidity (requires Wi-Fi
connection).
Current schedule. Touch an arrow to change
temperature setting and select a Temporary or
Permanent Hold.
Indoor conditions. Shows indoor temperature and
humidity.
Current time. Touch to set the current time/date.
Alert Light. On when alert message is active or
system is set to EmHeat.
40
M7514

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents