Error And Status Indicate On The Control Panel - Ricoh SP 311DN Service Manual

Error and Status Indicate on the Control Panel

The LED on the operation panel indicates the machine status, including any errors.
LED
Toner/ Alarm
Paper
End
- -
- -
Flashing -
On -
- Flashing
- On
- On
SM Appendix
Status
Power
On The power is on.
Flashing Importing data.
On The print cartridge is
almost empty.

On The print cartridge
is empty.

The print cartridge
is not set correctly.

The tray has run
out of paper.
On A paper jam has
occurred in the
machine.

On The size of paper to
print on and the
size of the paper
loaded in the tray
do not match.

A cover is open.
On Another type of error
has occurred.
The status is normal.
The status is normal.
Replace the print cartridge
before it becomes empty.

Replace the print
cartridge.

Set the print cartridge
again correctly.

Load paper into the
tray.
Use Web Image Monitor or
Smart Organizing Monitor
to determine where the
paper jam is, and then
remove the jammed paper.
See the user's guide
"Paper Feed Problems".

Use Web Image
Monitor or Smart
Organizing Monitor to
check the paper size
settings, and then
change either the size
of paper to print on or
the size of paper
loaded in the tray.

Confirm that all the
covers are closed
completely.
Use Web Image Monitor or
Smart Organizing Monitor
2-3 M154/M155/M174/M175/A0A7/M287/M0BB
Solution