Fusing And Exit; Fusing Unit - Ricoh SP 311DN Service Manual

Fusing and Exit

4.7 FUSING AND EXIT

Switch off the main power, unplug the machine from its power source, and allow the
fusing unit to cool before removing it.

4.7.1 FUSING UNIT

1. Right cover (page 4-8 "Right Cover")
2. Rear cover (page 4-7 "Rear Cover")
3. Release the lock [A], and then remove the entrance guide [B] (
4. Disconnect the three connectors (
5. Pass the cable [A] through the hole [B] inside the machine.
M154/M155/M174/M175/A0A7/M287/M0BB
x 1)
4-28
x 1)
SM