Safety; Electrical Safety; Symbols - ABB WaterMaster FET100 User Manual

WaterMaster FET100
Electromagnetic floweter | Transmitter

1 Safety

Information in this manual is intended only to assist our customers in the efficient operation of our
equipment. Use of this manual for any other purpose is specifically prohibited and its contents are not to be
reproduced in full or part without prior approval of the Technical Publications Department.

1.1 Electrical Safety

This equipment follows, obeys the requirements of CEI/IEC 61010-1:2001-2 'Safety Requirements for
Electrical Equipment for Measurement, Control and Laboratory Use' and follows, obeys NIST and OSHA.
If the equipment is used in a manner NOT specified by the Company, the protection provided by the
equipment may be impaired.

1.2 Symbols

One or more of the following symbols may appear on the equipment labeling:
Warning – Refer to the manual for instructions
Caution – Risk of electric shock
Protective earth (ground) terminal
Earth (ground) terminal
2
Direct current supply only
Alternating current supply only
Both direct and alternating current supply
The equipment is protected
through double insulation
OI/FET100–EN Rev. A
1 Safety