Outgoing Rules; Outbound Services - Sitecom WL-108 Full Manual

Outgoing Rules

This screen is displayed when the "Add" on "Edit" button for Outgoing
Rules is clicked.
Data - Outbound Rules Screen

Outbound Services

Select the desired Service or application to be covered by this rule. If
Service
the desired service or application does not appear in the list, you must
define it using the Services menu.
Select the desired action for packets covered by this rule:
Action
•
•
•
•
Note:
•
•
•
Select the desired option to determine which PCs are covered by this
LAN Users
rule:
•
•
PC - If using Single PC above, select the PC or Server on your LAN
which will be covered by this rule.
These settings determine which packets are covered by the rule, based
WAN Users
on their source (WAN) IP address. Select the desired option:
•
•
•
WL-108 Wireless Network Modem/router 11M
BLOCK always
BLOCK by schedule, otherwise Allow
ALLOW always
ALLOW by schedule, otherwise Block
Any outbound traffic which is not blocked by rules you create will be
allowed by the Default rule.
ALLOW rules are only useful if the traffic is already covered by a
BLOCK rule. (That is, you wish to allow a subset of traffic which is
currently blocked by another rule.)
To define the Schedule used in these selections, use the "Schedule"
screen.
Any - All PCs are covered by this rule.
Single PC - Only the selected PC is covered by this rule.
If selected, you must select the PC.
Any - All IP addresses are covered by this rule.
Address range - If this option is selected, you must enter the
"Start" and "Finish" fields.
Single address - Enter the required address in the "Single/Start"
fields.
56