•
WEP data
encryption
•
Access Point
•
Allow access
by ...
•
Buttons
Configure
Click this button to view the WEP sub-screen. See the following section
for more details.
WEP
Set Stations
Click this button to select the required PCs.
Save
Save the data on screen.
Cancel
The "Cancel" button will discard any data you have entered since the
last "Save" operation.
WEP Screen
This screen is accessed by clicking the "Configure WEP" button on the
Wireless screen.
WL-108 Wireless Network Modem/router 11M
WEP (Wired Equivalent Privacy) status will display "Enabled" or
"Disabled", depending on whether WEP is being used. If used,
data is Encrypted before being transmitted, making
communication more secure.
Click the "Configure WEP" button to access the WEP sub-screen,
and view or change the WEP settings.
All Wireless Stations - All wireless stations can use the access
point to access your LAN.
Trusted Wireless stations only - Only selected wireless stations
access your LAN. To select the required wireless stations, click the
"Select Stations" button.
26
Need help?
Do you have a question about the WL-108 and is the answer not in the manual?