Remote Management - Sitecom WL-108 Full Manual

WL-108 Wireless Network Modem/router 11M

Remote Management

If enabled, this feature allows you to manage the WL-108/109 via the
Internet.
Data - Remote Management Screen
Remote Administration
Enable Enable to allow management via the Internet. If Disabled, this device
will ignore management connection attempts from the Internet.
Remote
Management
Port Number Enter a port number between 1024 and 65535 (8080 is
recommended). This port number must be specified when you
connect (see below).
Note: The default port number for HTTP (Web) connections is port
80, but using port 80 here will prevent the use of a Web "Virtual
Server" on your LAN. (See Advanced Internet - Virtual Servers)
Current IP
You must use this IP Address to connect (see below).
Address
This IP Address is allocated by your ISP. But if using a Dynamic IP
Address, this value can change each time you connect to your ISP.
So it is better if your ISP allocates you a Fixed IP Address.
Access Permission
Allow Remote Select the desired option.
Access
•
•
•
For security, you should restrict access to as few external IP
addresses as practical.
Everyone - allow access by everyone on the Internet.
Only This Computer - allow access by only one IP address.
Enter the desired IP address.
IP Address Range - allow access from a range of IP addresses
on the Internet. Enter a beginning and ending IP address to
define the allowed range.
39