Connection Status - Pppoe/Pppoa - Sitecom WL-108 Full Manual

Connection Status – PPPoE/PPPoA
If using PPPoE (PPP over Ethernet) or PPPoA (PPP over ATM), a screen like
the following example will be displayed when the "Connection Details"
button is clicked.
Data - PPPoE Screen
Connection
Connection Time
PPPoE Link
Status
Negotiation
IP Address
Network Mask
Buttons
Connect
Disconnect
Close
WL-108 Wireless Network Modem/router 11M
This indicates how long the current connection has been
established.
This indicates whether or not the connection is currently
established.
• If the connection does not exist, the "Connect" button can be
used to establish a connection.
• If the connection currently exists, the "Disconnect" button
can be used to break the connection.
This indicates the status of the PPPoE Server login.
The IP Address of this device, as seen by Internet users. This
address is allocated by your ISP (Internet Service Provider).
The Network Mask associated with the IP Address above.
If not connected, establish a connection to your ISP.
If connected to your ISP, hang up the connection.
Close this window
32