Installing The 2.5' Hdd - Advantech FWA-3232 Startup Manual

Installation

Installing the 2.5' HDD

1．Take out the HDD rubbers and screws from the accessory
box ,and push the rubbers into the hole on the bracket;
2．Install the 2.5' HDD in the bracket with four screws.
3．Fix the HDD and bracket in the chassis. SATA port need be
forward to the power. Connect and place the cables as the
picture shows.
Installing Express Modules
1．Release the 2 screws. Push the lower half of the baffle and
take it out；
2．Insert the express module into the case and tighten the
screws.