Charge Your Spare Battery With The Multicharger; Carry Cases - Cisco 8821 Accessory Manual

Cisco Accessories
Step 2 Place your phone in the empty charging slot. If your phone is in a case, press the phone into the charging slot
to ensure that the phone connects with the contacts.
Make sure that the LED on the phone lights red. If the LED does not light up, remove the phone and reinsert
it into the multicharger.
Step 3
(Optional) Slide the charging cup into the multicharger and press the cup into place so that the cup is flush
with the top of the multicharger.

Charge Your Spare Battery with the Multicharger

You can charge a spare battery in the multicharger. The battery can take up to 3 hours to charge.
Caution Do not charge the battery in a hazardous environment.
When the battery is charging, the Battery LED beside the battery lights red. When the battery is charged, the
Battery LED lights green.
Procedure
Place the battery in an empty spare battery slot, aligning the battery contacts with the charger connecter.
If the Battery LED does not light red, remove the battery and reinsert it into the battery slot.

Carry Cases

You can put your phone into a carry case to make it easy to carry your wireless phone and to provide some
protection for the phone. When your phone is in the case, you don't have to remove the case to charge the
phone.
We have the following cases available:
• Cisco Wireless IP Phone 8821 and 8821-EX Leather Case
• Cisco Wireless IP Phone 8821 and 8821-EX Holster Case
Charge Your Spare Battery with the Multicharger
Cisco Wireless IP Phone 882x Series Accessory Guide
15