Charge Your Spare Battery With The Desktop Charger; Cisco Wireless Ip Phone 8821 And 8821-Ex Multi Charger - Cisco 8821 Accessory Manual

Cisco Accessories

Charge Your Spare Battery with the Desktop Charger

You can charge a spare battery in the desktop charger. The battery can take up to 3 hours to charge.
Do not charge the battery in a hazardous environment.
Caution
When the battery is charging, the spare battery LED on the charger lights red. When the battery is charged,
the spare battery LED on the charger lights green.
Procedure
Step 1
Hold the battery so that the Cisco label faces you, and the arrows on the battery point down.
Step 2 Place the spare battery in the slot behind the phone cradle and press down firmly.

Cisco Wireless IP Phone 8821 and 8821-EX Multi Charger

You can charge up to six phones and six spare batteries at the same time with the Cisco Wireless IP Phone
8821 and 8821-EX Multi Charger. If your phone is in a protective case, you can charge it without removing
the case.
You can place the multicharger on a work surface or mount it on a wall with the wall mount kit. You can also
secure the multicharger with a standard laptop cable lock.
The LED beside the battery slot shows the charging status. When the battery is charging, the LED lights red.
When the battery is charged, the LED lights green.
Battery slot LEDs can take several minutes to indicate that the battery is fully charged. If you move a
fully-charged battery to another slot, the LED might initially light red before it turns green.
Charge Your Spare Battery with the Desktop Charger
Cisco Wireless IP Phone 882x Series Accessory Guide
11