Perlick CC24W Series Installation & Operation Manual page 3

WARNING
Carefully inspect the cabinet
for hidden damage. If damage is discovered, file
your claim immediately with the transportation
company. Perlick is not responsible for damage
in transit.
CAUTION
When moving the unit, be
sure to protect finished flooring with
appropriate material to avoid damage from
moving the appliance.
CAUTION
If unit has been laid on its
back or sides, place unit upright and allow
minimum of 24 hours before connecting the
unit. Failure to do so can affect the function
and performance of the appliance.
This appliance should be installed in a dry,
ventilated indoor location. The ambient
temperature of the location must be between
55°F (13°C) and 100°F (43°C) for optimal
performance.
Wine Column Refrigeration Installation & Operation Manual
SITE PREPARATION
When fully stocked, Perlick wine column refrig-
eration is very heavy. To ensure safety and pre-
vent home damage, the load-bearing capacity
of your floor must be 550 lbs for each CC24W
column being installed.
This product must be installed on a level floor
for safety and optimal performance. The base
must be flat to ensure anti-tip brackets properly
function and that the refrigeration system is lev-
el. Any walls and surrounding furniture/fixtures
need to be securely attached to the floor, wall
studs or concrete prior to installing the column.
To ensure proper performance, the air intake
(toe kick) must not be blocked. Perlick refrigera-
tion is front-breathing, and covering the intake
will cause the system to overheat and fail.
3 Printed in USA