Perlick CC24W Series Installation & Operation Manual page 14

INSTALLING DOOR OVERLAY PANELS CONTINUED
Custom Overlay Panels
A custom door panel and handle hardware must
be installed. The thickness of the custom panel
can vary. A minimum 5/8" (16) thick panel is
required, but the thickness can be increased
provided it does not exceed the maximum panel
weight of 65 lbs (29). 3/4" panel is recommended.
Please note that the combined door and overlay
weight cannot exceed 120 lbs (54). The depth of
each model is 24" (610). Allow for panel thickness
when planning the finished opening depth.
Templates for solid and glass door models can
be found on page 9.
CAUTION
A s r e v e a l s b e t w e e n
cabinetry and the unit decrease, severe finger
pinching can occur while the door is closing.
The height of the custom door panel can extend
beyond the typical panel height provided it does
not exceed the weight limit listed above.
CAUTION
Do not install a solid
overlay panel onto the front of a glass door
model. Condensation will form between the
glass and the overlay panel, which will cause
damage to custom cabinetry.
Side Panels
Custom panels can be built to customer
specifications to match surrounding
cabinetry.
Printed in USA
Wine Column Refrigeration Installation & Operation Manual
14