Placement And Alignment Of Appliance - Perlick CC24W Series Installation & Operation Manual

CAUTION
Before moving the unit
into position, secure the door closed and
protect any finished flooring.
WARNING
If the unit has been on its
back, it must stand upright for a minimum of
24 hours before connecting power.
Move the unit near the opening. Plug the power
cord into the grounded outlet and roll the unit into
position. Push unit into place.
Leveling
Front and rear leveling legs can be adjusted from
the front once the unit is positioned.
NOTE: Remove grill to access leveling adjustment
access holes.
Adjusting front leveling legs.
Adjusting rear leveling legs.
Printed in USA
Wine Column Refrigeration Installation & Operation Manual
PLACEMENT & ALIGNMENT
LEVELING THE UNIT
10
Once the unit is in position, height adjustment
can be made from the front. Using the hex
driver leveling tool, turn clockwise to raise the
unit or counterclockwise to lower. Refer to the
illustration below.
When the unit is properly leveled, door adjustments
are less likely to be necessary.
CAUTION
Level the unit to the floor,
not surrounding cabinetry. This could affect
the operation of the unit, such as door closing.
WARNING
To reduce the possibility
of the unit tipping forward, the front leveling
legs must be in contact with the floor.