Reset Energy Counter; Introduction; Reset Energy Counters Via User Data - Siemens SIMATIC ET 200SP Manual

Energy counters

7.4 Reset energy counter

7.4 Reset energy counter
7.4.1

Introduction

Introduction
At the beginning of a new work order, it may be useful to reset the energy counter of the
Energy Meter Reset here means that the energy counters are reset to their start value.
The following sections describe how you
● Reset energy counters via the outputs of the user data.
● Reset energy counters via data record 143.
7.4.2

Reset energy counters via user data

Introduction
Due to the differing lengths of the output data resetting of the energy counters depends on
the configured module version.
If you use module versions with 12 bytes of output data, you can
● Reset energy counters for all phases separately by active, reactive and apparent energy.
● Reset energy counters for each individual phase separately by active, reactive and
apparent energy.
If you use the module version with 2 bytes output data, you always reset all the energy
counters simultaneously.
42
Analog input module AI Energy Meter 400VAC ST (6ES7134-6PA01-0BD0)
Manual, 10/2017, A5E36061895-AB