Setting Up Menu After Completing Installation - Sony HSR-1 Service Manual

2-8-2. Setting Up Menu after Completing Installation

When HSR-1/1P/2/2P is installed, implement the following settings from the menu.
Refer to Operating Instructions for the menu setting procedure.
1. Move to the "EXHANCE" of the menu grade.
2. Set the time.
Set the time using the "TIME ADJUST" menu.
3. Set whether camera is connected or not.
Set camera connection using menu "IMAGE CONTROL MENU" → "CAMERA CONNECTION".
4. Delete unnecessary division display.
Set all of the unnecessary division display to "OFF" using menu "IMAGE CONTROL MENU" → "MONI DISP
STRUCTURE" and "PLAY DISP STRUCTURE".
5. Set camera name.
Set camera name using menu "INDICATION CONTROL MENU" → "CAMERA NAME".
6. Set record mode.
Set record mode using menu "REC FUNCTION MENU" → "SETTING OF REC MODE".
When using a personal computer
Set the transfer rate using menu "REMOTE CONTROL MENU" → "RS232C".
When HSR-1/1P/2/2P is connected via PARALLEL I/O connector
Set using menu "REMOTE CONTROL MENU" → "PARALLEL INPUT", "PARALLEL OUTPUT" and "PARALLEL
OUT VOLTAGE".
When HSRA-11 is increased.
. When an HSRA is increased, the setting "CAMERA CONNECTION" is automatically changed to "YES". This menu is
re-set whenever number of HSR is changed.
When you want to change this setting, change the menu using displays "IMAGE CONTROL MENU" → "CAMERA
CONNECTION".
. When an HSRA is increased, the setting "NUMBER OF REC CAMERAS" is automatically changed to "REC". This
menu is re-set whenever number of HSR is changed.
When you want to change this setting, change the menu using displays "REC FUNCTION MENU" → "SETTING OF
REC MODE".
HSR-1/1P
HSR-2/2P
2-9