5-2. DISPLAY
5-2-1. Monitor Display
The item that is currently selected is highlighted. When the arrow mark → flashes at the rightmost end, it indicates that
a directory exists below the present layer. When the arrow mark ← flashes at the leftmost end, it indicates that a directory
exists above the present layer.
As you move down to a lower directory, the number of arrow marks (>) increases to indicate that you are in a lower
directory.
5-2-2. Character Display
The item that is currently selected is displayed.
The directory that you are currently in is displayed by the number of arrow marks (>). As you move down to a lower
directory, the number of arrow marks (>) increases to indicate that you are in a lower directory.
First directory
Second directory
Third directory
Fourth directory
5-3. OPERATION PROCEDURE
5-3-1. Key Position
Use the keys on the front panel shown below to execute the maintenance menu.
F FWD
FRAME
[CURSOR] key [)]/[(] Moves within the same directory.
[CURSOR] key [&]/[*] Moves to different directories.
5-2
No arrow mark (>) is displayed.
>
>>
>>>
MENU
CURSOR
SET/YES
RESET/NO
EJECT
TIME
SEARCH
ALARM
SEARCH
HSR-1/1P
HSR-2/2P