Setting The Clock; Setting The Clock After Recharging The Battery - Sony ICD-UX523 Operating Instructions Manual
Ic recorder
Hide thumbs
Also See for ICD-UX523:
- Specifications (5 pages) ,
- Quick start manual (2 pages) ,
- Copying manual (2 pages)
Table of Contents
Advertisement
Preparing the Recorder
Setting the Clock
You need to set the clock to use the alarm function or record the date and time.
Setting the clock after recharging the battery
When you insert a battery for the first time, or when you insert a battery after
the IC recorder has been without a battery for more than 1 minute, the "Set
Date&Time" animation appears, and then the year section begins to flash in the
clock setting display window.
Set year, month, day, hour and minute.
Press or to set the year (the last two digits of the year), and then press
/ENTER. Repeat this procedure to set month, day, hour, and minute in
sequence.
You can move the cursor to the year, month, day,
hour and minute by pressing
When you set the minute and press /ENTER,
the clock reflects the setting.
Press STOP to return to the stop mode display.
STOP
,
/ENTER
,
and
.
Advertisement
Table of Contents
