Hierarchical Structure Of Maintenance Menu - Sony HSR-1 Service Manual

To service the HSR-1/1P/2/2P, select the Maintenance Menu, then the Service Use (submenu) from the menu hierarchy.
(Refer to section "5-3-2. How to Enter Service Use" for the procedure to enter the Maintenance Menu and the Service Use.)
The menu is displayed on the monitor that is connected to the VIDEO OUT A or S-VIDEO terminal of the rear panel.
In addition, part of the message is displayed on the character display located on the top right of the front panel.

5-1. HIERARCHICAL STRUCTURE OF MAINTENANCE MENU

The maintenance menu has a hierarchical structure. To confirm and change the settings, move among the directories of the
hierarchy.
First directory of the menu
(Top menu)
MENU GRADE (Menu grade)
MAINTENANCE MENU (Mainte Menu)
* The messages shown in parentheses ( ) appear in the character display.
* Items in the menu that are not shown above are not used in this section.
* Refer to section "5-3-2. How to Enter the Service Use" for the procedure to enter the Maintenance Menu and the Service
Use.
HSR-1/1P
HSR-2/2P
SECTION 5
MAINTENANCE MENU (SERVICE USE)
Second directory of the menu
ENHANCED MENU (>Enhanced)
HOURS METER (>HoursMeter)
VERSION DISPLAY (>Ver Disp)
SERVICE USE (>ServiceUse)
Third directory of the menu
_
_
_
TAPE (>>Tape)
HARD DISK (>>Hard Disk)
SYSTEM DATA (>>Sys Data)
BATT BACKUP (>>BatBackup)
MULTIPLEX (>>Multiplex)
CONT REC PB (>>ContRecPB)
EE MODE (>>EEMode)
DRAM DUMP (>>DRAM Dump)
DEBUG INFO (>>Dbg Info)
ERROR INFO (>>ErrorInfo)
ERROR LOG (>>ErrorLog)
CALIBRATE CLOCK (>>Calb clck)
BATT ALL RESET (>>BattReset)
5-1