Step 4: Setting The Clock; Setting The Clock Using The Menu; Step 5: Setting The Language To Be Used In The Display Window; Setting The Clock After Recharging The Battery - Sony icd-ux512f Quick Start Manual

Step 4: Setting the Clock

x STOP
N /ENT
v , V
You need to set the clock to use the alarm
function or record the date and time.
When you insert a battery for the first time, or
when you insert a battery after the IC recorder has
been without a battery for more than 1 minute, the
"Set Date&Time" animation appears, and then the
year section begins to flash in the clock setting
display window.
Setting the clock after
recharging the battery
1
Press or on the control button to set the
v V
year, month, day, hour, and minute in sequence,
and then press N /ENT.
Select the last two digits of the year when you
set the year.
2
Press STOP to return to the stop mode
x
display.
Setting the clock using the
menu
Refer to "Setting the clock using the menu"
(page 14 in "Operating Instructions").
Step 5: Setting the
Language to Be Used in
the Display Window
You can select the language to be used for
messages, menus, folder names, file names, etc.
from 11 languages.
1
(IC recorder setting) tab t
Select the
"Language" in the menu, and then press
ENT.
x STOP
N /ENT
v , V
/
N
5
GB