Returning To The Default Settings - Initializing; Menu Items; Top Menu (First Layer) - Sony HSR-1 Service Manual

Menu Operations
To display the basic items only
The menu is set to Enhanced grade at the factory to
display both the basic and enhanced items.
To display the basic items only, proceed as follows:
1
Highlight MENU GRADE (or display "Menu
grade") on the Top menu by pressing the V or v
key.
Monitor display
SETUP MENU
IMAGE CONTROL MENU
INDICATION CONTROL MENU
REC FUNCTION MENU
FUNCTION CONTROL MENU
REMOTE CONTROL MENU
MAINTENANCE MENU
TIME ADJUST
MENU INITIALIZE
m
MENU GRADE : ENH
LANGUAGE : ENG
Character display
Menu grade
2
Proceed to the next layer by pressing the b key.
3
Select BASIC (or display "Basic") by pressing the
V key.
Monitor display
SETUP MENU
MENU GRADE : ENH
M
BASIC
* ENHANCED
Character display
>Basic
4
Press the SET key.
The message "NOW SAVING" is displayed, and
the enhanced items will not be displayed when you
activate Menu mode the next time.
4-4
Chapter 4 Menu Operations
Returning to the Default Settings
– Initializing
To restore the factory (default) settings for the menu
items (initialize the items) after having changed them,
proceed as follows.
1
Highlight MENU INITIALIZE (or display "Menu
Init") on the Top menu by pressing the V or v key.
The MENU INITIALIZE display appears.
MENU INITIALIZE
INIT EXCEPT PARALLEL
INIT INCLUDING PARALLEL
(WARNING)
IF YOU INIT PARALLEL,
PLEASE CHECK A CIRCUIT
CONNECTING PARALLEL I/O
CHANGE: µ
INIT: SET ABORT: MENU
2
Specify whether to initialize the menu except the
parallel input/output settings or to initialize the
menu including the parallel input/output settings.
Note that the parallel input/output settings include
those to specify the output signal voltages.
Connected external circuits can be damaged if
these settings are improperly changed.
3
Press the SET/YES key.
The specified item is returned to the default setting.

Menu Items

Top Menu (First Layer)

Monitor display
SETUP MENU
IMAGE CONTROL MENU
INDICATION CONTROL MENU
REC FUNCTION MENU
FUNCTION CONTROL MENU
REMOTE CONTROL MENU
MAINTENANCE MENU
TIME ADJUST
MENU INITIALIZE
MENU GRADE : ENH
LANGUAGE : ENG
The menus marked with are enhanced menus,
which are displayed only when MENU GRADE is set to
ENH.
Display Char. display Contents
Layer 1 Layer 2
Image Menu
IMAGE CONTROL MENU Menu to set the items regarding monitoring and
playback.
See "Image Control Menu" on page 4-6.
INDICATION CONTROL MENU Indct Menu Menu to set the items regarding character data to be
indicated on the screen.
See "Indication Control Menu" on page 4-8.
REC FUNCTION MENU RecFuncMenu Menu to set the items regarding recording functions.
See "Recording Function Menu" on page 4-10.
FUNCTION CONTROL MENU FuncMenu Menu to set the items regarding special functions,
such as auto rewind and beep sound.
See "Function Control Menu" on page 4-11.
REMOTE CONTROL MENU Remote Menu Menu to set the items regarding external controls via
RS-232C and PARALLEL I/O.
See "Remote Control Menu" on page 4-13.
MAINTENANCE MENU Mainte Menu Menu for maintenance, such as the hours meter and
self-diagnosis.
See "Maintenance Menu" on page 4-15.
TIME ADJUST Time Adjust Enters the mode to set the built-in clock.
For details, see "Setting the Clock" on page 5-6.
MENU INITIALIZE Menu Init Initializes the menu settings.
Menu grade
MENU GRADE Selects the items to be displayed.
BASIC >Basic Displays only the basic items.
>Enhanced
ENHANCED Displays both the basic and enhanced items.
LANGUAGE Language Selects the language for superimposing.
ENGLISH >English
JAPANESE >Japanese
Character display
SETUP MENU
↓
Image Menu
The top menu item selected when you left the menu the
last time is displayed.
The setting shown in bold characters in the Layer 2
column of the table is the standard setting and is
displayed with an asterisk on the monitor screen.
4-5
Chapter 4 Menu Operations