Simple-Swap-Drive Backplate - Lenovo ThinkSystem ST550 7X09 Maintenance Manual

Table of Contents

Advertisement

Simple-swap-drive backplate

Use the section to understand the cable routing for the simple-swap-drive backplate.
This topic contains the following information:
• "Server models with four 3.5-inch simple-swap drives" on page 36
• "Server models with eight 3.5-inch simple-swap drives" on page 37
Server models with four 3.5-inch simple-swap drives
Use this section to understand the cable routing for server models with four 3.5-inch simple-swap drives.
Note: Ensure that all cables are routed through the correct cable clips.
Figure 19. Cable routing for server models with four 3.5-inch simple-swap drives
Cable
1
Signal cable on the backplate
2
Power cable on the backplate
36
ThinkSystem ST550 Maintenance Manual
To
SAS 0–3 connector on the system board
Backplane 1 power connector on the system board

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinksystem st550 7x10

Table of Contents