Dimm Replacement; Remove A Dimm - Lenovo ThinkSystem ST550 7X09 Maintenance Manual

After installing the expansion drive cage:
1. Ensure that the signal cables are secured by the clips
Figure 82. Securing and binding the signal cables correctly
2. Complete the parts replacement. See "Complete the parts replacement" on page 178.

DIMM replacement

Use this information to remove and install a DIMM.

Remove a DIMM

Use this information to remove a DIMM.
"Read the
installation
Guidelines" on
page 59
Attention:
• Disconnect all power cords for this task.
• DIMMs are sensitive to static discharge and require special handling. In addition to the standard
guidelines for Handling static-sensitive devices:
1 and are bound correctly by the Velcro strap.
"Power off
the server
for this task"
on page 12
Chapter 3
"ATTENTION:
Static Sensitive Device
Ground package before opening"
on page 60
.
Hardware replacement procedures
109