Figure 34. Front door installation
Step 1.
Align the two hooks on the front door with the corresponding holes in the front bezel. Then, move
the front door inward and then pull it slightly downward until it is secured in place by the hooks.
Step 2.
Close the front door.
Foot stands replacement
Use this information to remove and install the foot stands.
Note: This section applies only to server models that have foot stands installed.
Remove the foot stands
Use this information to remove the foot stands.
"Read the
installation
Guidelines" on
page 59
To remove the foot stands, complete the following steps:
Watch the procedure. A video of the removal process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Acsjj4tU79GzKnWG316BYn
• Youku:
http://list.youku.com/albumlist/show/id_50483452
Step 1.
Lay the server on its side for easier operation.
.
Chapter 3
Hardware replacement procedures
63