Replaying Step-By-Step - Fluke 190-102 User Manual

ScopeMeter® Test Tool 190 Series II
Users Manual

Replaying Step-by-Step

To step through the last scope screens, do the following:
From scope mode, open the
1
REPLAY
REPLAY
Observe that the waveform is
frozen and that
the top of the screen (see Figure
23).
2 Step through the previous
F1
screens.
Step through the next screens.
3
F2
Observe that the bottom of the waveform area displays the
replay bar with a screen number and related time stamp:
50
menu.
appears at
REPLAY
Figure 23. Replaying a Waveform
The replay bar represents all 100 stored screens in
memory. The icon represents the picture being
displayed on the screen (in this example: SCREEN -51). If
the bar is partly white, the memory is not completely filled
with 100 screens.
From this point you can use the zoom and cursor functions
to study the signal in more detail.