Resetting The Test Tool; Suppressing Key Labels And Menu's - Fluke 190-102 User Manual

ScopeMeter® Test Tool 190 Series II
Users Manual

Resetting the Test Tool

If you want to reset the test tool to the factory settings,
without clearing the memories, do the following:
1
Turn the test tool off.
2 Press and hold.
USER
3
Press and release.
The test tool turns on, and you should hear a double beep,
indicating the reset was successful.
4 Release.
USER
88

Suppressing Key Labels and Menu's

You can close a menu or hide key label at any time:
Hide any key label, press again to display the
CLEAR
key label again (toggle function).
A displayed menu will be closed.
To display menus or key labels, press one of the yellow
menu keys, e.g. the
SCOPE
You can also close a menu using the
CLOSE.
key.
softkey
F4