Adjusting the reference value
To adjust the reference value, do the following:
Display the Adjust Reference
5
F3
menu.
6
Select the applicable relative
F1
measurement reading.
7
Select the digit you want to
adjust.
8
Adjust the digit. Repeat step 7
and step 8 until finished.
9
Enter the new reference value.
ENTER
Using the Scope and Meter
Making Multimeter Measurements (for models 190-xx2)
Making Multimeter Measurements (for
models 190-xx2)
The screen displays the numeric readings of the
measurements on the meter input.
Making Meter Connections
Use the two 4-mm safety red (
banana jack inputs for the Meter functions.
(See Figure 14.)
CAT II 1000V
CAT III 1000V
CAT IV 600V
Figure 14. Meter Connections
1
) and black (COM)
35