Fluke 190-102 User Manual page 13

Introduction
Read "Safety Information" before using this
instrument.
The descriptions and instructions in this manual apply to
®
all ScopeMeter Test Tool 190 Series II versions
(hereafter referred to as the instrument or as the test tool).
The versions are listed below. The version 190-x04
appears in most illustrations.
Input C and Input D, and the Input C and Input D selection
D
keys ( C and
versions 190-x04.
Warning
) are only present on the
Version Description
190-062 Two 60 MHz Scope Inputs (BNC),
One Meter Input (banana jacks).
190-102 Two 100 MHz Scope Inputs (BNC),
One Meter Input (banana jacks).
190-104 Four 100 MHz Scope Inputs (BNC)
190-202 Two 200 MHz Scope Inputs (BNC),
One Meter Input (banana jacks).
190-204 Four 200 MHz Scope Inputs (BNC).
190-502 Two 500 MHz Scope Inputs (BNC),
One Meter Input (banana jacks).
190-504 Four 500 MHz Scope Inputs (BNC).
Introduction
1