BrandMotion 9002-7601 Installation Instructions

Dual Mount Universal Kit Aftermarket CMOS Camera with Optional Parking Gridlines
Please read thoroughly before starting installation and check that kit contents are complete.

Items Included in Kit:

Chassis Harness
Power Harness with RCA connectors
Camera mounted on license plate bracket
Small bag containing:
Two license plate bolts [optional]
Male-to-male RCA adapter [not required]
Alternate Camera Mount with Double-sided
Adhesive Foam
Instructions

Safety Precautions:

Work in well ventilated area that is clear of obstructions.
•
Secure vehicle with tire chucks in both front and rear of tires.
•
Turn vehicle accessories OFF and ensure ignition key is in OFF position.
•
Wear safety goggles and snug fitting clothes.
•
Use tools only for their intended purpose and which are in good repair.
•
Only perform this task if confidence, skill, and physical ability permit.
•
NOTE: We strive to provide accurate and up-to-date installation instructions. The latest full color
9002-7601 Instructions for printing.doc
Installation Instructions (Kit # 9002-7601)
instructions can be accessed at www.brandmotion.com
Page 1 of 5
Tools & Supplies Needed:
¼" Drill Bit
Power Drill
Multi-meter or computer-safe test light
Ground Eyelet (recommended)
Soldering Iron
Wire Ties or Electrical Tape
Solder (recommended) or T-Taps
Plastic trim removal tool
Rubber Grommet or Silicone Caulk
(recommended)
Vehicle service manual (if needed)
Small sheet metal screws (recommended for
Alternative Camera Mount install)
GS