Canceling The Last Alarm Condition - Electrolux AWF 1210 Service Manual

7.8 Canceling the last alarm condition

To cancel the last memorised alarm condition press button no. 2 (TEMPERATURES) and no. 4 at the same
time during one of the 8 phases of the diagnostics cycle and not in the alarm or configuration reading
positions.
To check for correct operation, go back to the alarm reading position (the L10 LED is on); the display should
show E00.
The alarm is cancelled also when a new configuration is given to the main PCB.
50
SOI/DT 2002-06 eb 599 35 27-25