Table of Contents
Advertisement
7.9.1
Configuration code
The configuration code (16 alphanumeric digits) is
shown on a label affixed to the casing of the main PCB
and in the Spare Parts Lists describing the various
models. It is advisable to note the configuration code on
the casing of the new PCB fitted to the washing
machine
READING THE CONFIGURATION CODE
The configuration code is shown, one character at a time, on the display (if featured) or on the washing
phase display LEDs.
A = The first digit shown on the display (if featured) indicates the position of the value to be entered. On
models not fitted with a display window, the same information is displayed in binary format on the first
four washing phase LEDs. To read the various positions, press the SKIP/RESET button (8) repeatedly
(the first position displayed is "0").
B = The last digit on the display (if featured) indicates the value of the configuration character to be entered
in a given position. On models not fitted with a display window, the same information is displayed in
binary format on the second set of four washing phase LEDs. To modify the value of the character
displayed, press the START/PAUSE button (7) repeatedly as necessary.
BINARY CODES
The table below can be used to convert the binary code shown by the LEDs into the corresponding letter or
decimal number.
0
1
2
3
LED off
LED on
SOI/DT 2002-06 eb
4
5
6
7
8
9
10
11
A
b
52
12
13
14
15
C
d
E
F
599 35 27-25
Advertisement
Table of Contents
