Deleting The Last Alarm - Electrolux EWF1284EDW Service Manual

7.4 Deleting the last alarm

It is good practice to cancel the alarms stored:

After reading the alarm codes, to check whether the alarm re-occurs during the diagnostic cycle.

After repairing the appliance, to check whether it re-occurs during testing.
1. Enter the diagnostic mode (para. 6.1 or para. 6.2).
2. Turn the selector clockwise until the eleventh LED lights up.
3. Simultaneously press the START/PAUSE sensor and the nearest option sensor (as shown in
the diagram).
4. Keep your fingers over the sensors until the LCD display shows "E00" (at least 5 seconds).
N.B. With this operation all the alarms stored are deleted.
Technical Support - MDM
TC4
34/97
TC3
599 76 11-68 Rev. 01