On/Off Button; Exclusion Of The Buzzer At The End Of The Programme - Electrolux AWF 1210 Service Manual

Rinse hold: the appliance stops with water in the tub at the end
of programmes for which the RINSE HOLD option has been selected;
the display shows a zero (fixed, not flashing)
End of cycle: indicated by a zero (flashing) and, at the same time,
the door pilot lamp switches off. The zero re-appears when the
appliance is switched on again, if the previous programme has not
been cancelled. It may occur, when the appliance is switched on for
the first time, that a flashing zero is shown on the display and the
acoustic signals are activated. This is due to the fact that the machine
has performed a washing cycle during testing in the factory which has
not been cancelled on completion.
Delayed start, which is selected using the DELAYED START button.
The countdown starts when the START/PAUSE button is pressed,
and is decremented at intervals of one hour.
An incorrect option selection is signalled by Err on the display if the
function selected is not compatible with the programme. The buzzer
also sounds when an incorrect option is selected
An alarm code indicates a machine malfunction

2.11 ON/OFF button

Press the ON/OFF button to switch the appliance ON. The display
shows three flashing hyphens or a flashing zero. Press the same
button to switch the appliance OFF.
The ON/OFF button is an bipolar switch button, and is not part of the
display board

2.12 Exclusion of the buzzer at the end of the programme

By pressing the "TEMPERATURE (2)" and "SPIN (3)"
buttons at the same time (or the temperature button with
button 4) it is possible to deactivate the buzzer sound which
indicates the end of the programme; by repeating this
operation the buzzer will be activated again.
This function is always available and is memorized until it is
modified.
SOI/DT 2002-06 eb
15
599 35 27-25