Dexter Laundry T900 Parts & Service Manual page 64

Fault
INVALID
DRIVE
SECONDARY
FUSE ERROR
MAIN FUSE
ERROR
DELAY
64
Part # 8533-081-001 1/18
Description
Drive is not the Condition
correct Dexter
version of the
Delay
Delta E-drive
Action
Solution
Factory Condition
program error
Delay
Action
Solution
Factory Condition
program error
Delay
Action
Solution
Communication Condition
loss
Delay
Action
Solution
Customer Action
The error indicates the VF drive is not a Dexter
version of the Delta E-drive.
Immediate (after the Dexter indication value is
read from drive). Drive indication value is read
only at power up, before starting a cycle, once
every 24 hours, and in factory test mode.
Stop the machine and clear the cycle. Keep
the door locked until the machine has stopped
moving and then unlock the door.
The washer will not restart until the power is
removed and re-applied.
This error occurs when the fuse settings for the
Slave/Secondary microprocessor have not been
set correctly during factory programming
None
When detected, the washer control shall not be
operational.
The control must be re-programmed with the
factory programming tool.
This error occurs when the fuse settings for the
Master/Main microprocessor have not been set
correctly during factory programming
None
When detected, the washer control shall not be
operational.
The control must be re-programmed with the
factory programming tool.
This is an intermediate error code that displays
as the control is attempting to re-establish
communications with the variable frequency
drive. It is a condition of other specified Error
Codes (for example Comm Error6).
4 cycles of 10 seconds if during tumble portion
of cycle
4 cycles of 2 minutes if during spin portion of
cycle
Prompt is displayed during each of the specified
10 second or 2 minute periods. Error condition
(such as Comm Error4) occurs, but Delay is
shown instead of specific Error Code. Action
during this time is dependent on the specific
error code that caused it.
No exit strategy. Either communication is re-
established or the specific Error Code eventually
occurs.