Dexter Laundry T900 Parts & Service Manual page 44

Plus Cycle Options:
The Plus Cycle options allow for the user to prompt the customer for varying vend prices based on addi-
tional wash baths chosen. In general, the user can program the additional wash baths in a similar manner
to what was described in the "Cycles" Options section.
It also allows the user to return the programmable values to the factory default setting. No plus cycle op-
tions are active using the factory default. To reset all values in the Plus Cycles option to factory default,
press "Enter" when the "DEFAULT" prompt is shown. Press "Enter" again when the "RESET" prompt is
shown to confirm the action.
Figure 6, shown below, shows the next level options for Plus Cycle Options:
PLUS_CYCLE_FEATURES
44
Part # 8533-081-001 1/18
PRE_WASH
EXTENDED_WASH
EXTRA_RINISE
SuperWash
DEFAULT
CYCLE_TIME
WATER_TEMP
SPIN_TIME
FREE – 00.01-99.99
PRICE
CYCLE_TIME
FREE – 00.01-99.99
PRICE
CYCLE_TIME
WATER_TEMP
SPIN_TIME
FREE – 00.01-99.99
PRICE
SET_SUPERWASH
FREE – 00.01-99.99
PRICE
RESET
NO CYCLE -
1:00-15:00
(1:00 increments)
HOT
WARM
COLD
0:00-10:00
(1:00 increments)
(00.01 increments)
NO CYCLE -
1:00-15:00
(1:00 increments)
(00.01 increments)
NO CYCLE -
1:00-15:00
(1:00 increments)
COLD
WARM
0:00-10:00
(1:00 increments)
(00.01 increments)
RESET
RESET
(00.01 increments)