Labels And Diagrams All Wcad Models - Dexter Laundry T900 Parts & Service Manual

Cleaning the electronic coin selector
The EMP 500 v5 is an extraordinarily robust coin selector and operates relatively maintenance free.
However, it should be cleaned at regular intervals (minimum once a year) especially if it is operating in an
environment with high levels of dust, smoke or nicotine. The cleaning intervals are of course dependent on
the level of air borne contaminants.
Clean the coin path with soft brush and wipe the exposed surfaces. Use an alcohol moistened cloth. If you
find solid residues stuck to the coin rail remove it with an alcohol moistened cloth.
Optical sensors may be cleaned with a soft brush
very carefully with an air spray duster.
134
Part # 8533-081-001 1/18
Maintenance Instructions
Electronic Acceptor
Location of the optical sensor within coin outlet.