Dexter Laundry T900 Parts & Service Manual page 42

Cycles Option:
This option allows the user to set the bath time and spin time for the "Wash" bath. It also allows the user
to set bath time, water temperature and spin time for "Rinse" and "Final rinse" baths. (Water temperature
for the "Wash" bath is chosen by the customer using the "Hot", "Warm" and "Cold" buttons on the front of
the machine). For the "Final Spin" it also allows the user to set the spin speed (see additional description
below).
It also allows the user to return the values to factory defaults. To reset all values in the Cycles option to
factory default, press "Enter" when the "DEFAULT" prompt is shown. Press "Enter" again when the "RESET"
prompt is shown to confirm the action.
Figure 5, shown below, shows the sub
menu options for Cycles:
Bath
Prewash
Wash
Extended Wash
Rinse
Final Rinse
Extra Rinse Spin
Extra Rinse Bath
Final Extract Spin
42
Part # 8533-081-001 1/18
Bath Cycle Time (min.) Water Temp Delay Fill
0
9
0
4
5
n/a
0
n/a
Cold Off
Warm Off
n/a n/a
Cold Off
Cold
Off
n/a n/a
Cold Off
n/a n/a
Spin Time (min.)
0
0
n/a
1
n/a
0
n/a
6