Dexter Laundry T900 Parts & Service Manual page 49

Motor Hours:
The motor hours field shows the accumulated hours of operation for the motor. In many cases, it will match
the cycle hours of the machine. However, separate fields are provided in the event that a motor is replaced
on a machine.
The user can set the motor hours to a designated number. For example, if it is necessary to replace the
control on a machine, the new control could be programmed to show the motor hours that were recorded
by the previously installed control. The individual digits of the hours count can be set by using the "Up" or
"Down" buttons to change the number that is flashing. Once the desired digit of the hours is chosen, press
the "Enter" button to move to the next digit. Once the complete hours are chosen, the "Enter" button must
be held down for 3 seconds to confirm the action.
The user can also return the motor hours to the factory default setting (zero). To reset the motor hours,
press "Enter" when the "DEFAULT" prompt is shown. Press "Enter" again when the "RESET" prompt is
shown to confirm the action.
Cycle Hours:
The cycle hours field shows the accumulated hours of operation for the washer. In many cases, it will match
the motor hours of the machine. However, separate fields are provided in the event that a motor is replaced
on a machine. See the Motor Hours description for more information.
49
Part # 8533-081-001 1/18