Power And Led Tests - Cisco ONS 15454 Troubleshooting Manual

1.10.3 OC-N Card Transmit and Receive Levels
Note
Lock the GBIC into place by closing the handle down. The handle is in the correct closed position when
Step 6
it does not obstruct access to SC-type connector.
Return to your originating procedure (NTP).
Step 7
1.10.3 OC-N Card Transmit and Receive Levels
Each OC-N card has a transmit and receive connector on its faceplate.
Table 1-44 OC-N Card Transmit and Receive Levels
OC-N Card
OC3 IR4/STM1SH 1310
OC3 IR/STM 1SH 1310-8
OC12 IR/STM4 SH 1310
OC12 LR/STM4 LH 1310
OC12 LR/STM4 LH 1550
OC12 IR/STM4 SH 1310-4
OC48 IR/STM16 SH AS 1310
OC48 LR/STM16 LH AS 1550
OC48 ELR/STM16 EH 100GHz
OC192 SR/STM64 IO 1310
OC192 IR STM64 SH 1550
OC192 LR/STM64 LH 1550
OC192 LR/STM64 LH ITU 15xx.xx
TXP-MR-10G
MXP-2.5G-10G

1.11 Power and LED Tests

This section provides symptoms and solutions for power supply, power consumption, and LED indicator
problems.
Cisco ONS 15454 Troubleshooting Guide, R4.6
1-102
GBICs are keyed to prevent incorrect installation.
Trunk side:
Client side:
Trunk side:
Client side:
Receive Transmit
–28 to –8 dBm –15 to –8 dBm
–30 to –8 dBm –15 to –8 dBm
–28 to –8 dBm –15 to –8 dBm
–28 to –8 dBm –3 to +2 dBm
–28 to –8 dBm –3 to +2 dBm
–28 to –8 dBm –3 to +2 dBm
–18 to 0 dBm –5 to 0 dBm
–28 to –8 dBm –2 to +3 dBm
–28 to –8 dBm –2 to 0 dBm
–11 to –1 dBm –6 to –1 dBm
–14 to –1 dBm –1 to +2 dBm
–21 to –9 dBm +7 to +10 dBm
–22 to –9 dBm +3 to +6 dBm
–26 to –8 dBm –16 to +3 dBm
–14 to –1 dBm –6 to –1 dBm
–26 to –8 dBm –16 to +3 dBm
depends on SFP depends on SFP
Chapter 1 General Troubleshooting
Table 1-44 lists these levels.
November 2004