Node Icon Is Gray On Ctc Network View - Cisco ONS 15454 Troubleshooting Manual

Chapter 1 General Troubleshooting
Highlight the files and press the keyboard Delete key.
Step 4
Click Yes in the Confirm dialog box.
Step 5

1.8.6 Node Icon is Gray on CTC Network View

Symptom
name.
Table 1-14
Table 1-14 Node Icon is Gray on CTC Network View
Possible Problem
Different CTC releases
not recognizing each
other.
A username/password
mismatch.
No IP connectivity
between nodes.
A lost DCC connection. Usually accompanied by an embedded operations channel (EOC) alarm.
1.8.7 CTC Cannot Launch Due to Applet Security Restrictions
Symptom
enter the IP address in the browser window.
Table 1-15 on page 1-78
November 2004
The CTC network view shows one or more node icons as gray in color and without a node
describes the possible problems and the solutions.
Solution
Correct the core version build as described in the
Releases Do Not Recognize Each Other" section on page
Correct the username and password as described in the
Password Do Not Match" section on page
Usually accompanied by Ethernet-specific alarms. Verify the Ethernet
connections as described in the
page 1-83.
Clear the EOC alarm and verify the DCC connection as described in the
"EOC" alarm.
The error message "Unable to launch CTC due to applet security restrictions" appears after you
describes the possible problem and the solution.
1.8.6 Node Icon is Gray on CTC Network View
"1.8.9 Different CTC
"1.8.10 Username or
1-81.
"1.8.15 Ethernet Connections" section on
Cisco ONS 15454 Troubleshooting Guide, R4.6
1-80.
1-77