FUTABA 6K Instruction Manual page 68

6-channel digital proportional r/c system, 6 channel computer system
Hide thumbs Also See for 6K:
Table of Contents

Advertisement

Program mixing
P.MIX
Function
Mixing that can independently customize 4
functions can be used. Programmable mixing is
used to remove bad tendencies of the aircraft and
PDNH RSHUDWLRQ SOHDVDQW ,Q DGGLWLRQ WR PL[LQJ
between arbitrary channels, this function includes
P.MIX 1 ∼ 3 (normal type)
The following functions can be set for programmable mixing 1 to 3:
【Mixing Channel】
● Use this function by changing the channel because the master channel and slave channels initial setting is a
temporary combination.
● When OFS was selected as the master channel, the mixing rate setting applies to slave only. When a mixing
rate is set, slave servo operation is offset by that amount.
● A knob (VR) as well as a channel, can be selected as the master channel.
【Trim selection】
● Whether or not mixing includes master channel trim operation can be selected.
【Mixing reference point change】
● The master channel mixing reference point can be shifted.
【Switch selection】
● The programmable mixing ON/OFF switch can be selected. The switches that can be selected are switches A to
H and the throttle stick.
● The switch operating direction can be set. When a 2 position switch was selected, up /down can be set, and
when a 3 position switch was selected, up/up and down /up / and center/center/center and down /down can
be selected. When the throttle stick was selected, the ON/OFF position and operation direction can be set.
When "NULL" is selected, mixing is always ON.
P. MIX 4(curve type)
Programmable mix 4 allows setting of the mixing rate by 5 point curve.
OFS and knob use and trim selection by normal type master channel setting described above are
impossible, but switch selection is possible.
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the + key
for 1 second.
68
② Select
from the menu with the Jog
key.
(1 second)
linking (linking with another mix), trim addition,
offset, and switch setting functions.
"P.MIX"
③ Open the setting screen by
(Common)
pressing the Jog key.

Advertisement

Table of Contents
loading

This manual is also suitable for:

T6k

Table of Contents