FUTABA 6K Instruction Manual page 55

Model name ／ User name
MDL NAM
Function
A model name is inputted into each model in
T6K.
User name is inputted into T6K.
Model name setting（MDL NAME）
This function assigns a name to the model data. The model name is displayed on the top row of the
home screen. This serves to prevent model memory mistakes if the current aircraft name or other
name is entered.
● Up to 8 characters can be set.
User name setting（USR NAME）
The user name displayed on the home screen can be set. (When a user name is not set, the Futaba
logo is displayed) When the home screen display is changed to USR-NAME by PARAMETER, the set
user name is displayed on the home screen.
● Up to 8 characters can be set.
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the + key
for 1 second.
＋
（1 second）
Model name
User name
Model name
① Move the cursor to the model
name digit you want to change by
pressing the + key or ‒ key.
＋ −
or
Reset method： When the cursor is moved to any digit of the model name by + key or ‒ key and the
Jog key is pressed in the state in which the cursor was moved to RESET by Jog key, the model name
returns to its initial setting.
"MDL NAM"
② Select
from the menu with the Jog
key.
② M o v e t h e c u r s o r t o t h e
candidate character you
want to change with the
Jog key.
Set the model name by repeating steps ① to ③ above.
(Common)
③ Open the setting screen by
pressing the Jog key.
（Reset）
（Candidate characters）
● Characters that can be entered ;
Numeric/upper case alphabet/
lower case alphabet
③ Change the character by pressing
the Jog key.
55