FUTABA 6K Instruction Manual page 65

Back-light ／ Light-time ／ Light-adjustment
■ Back-light mode
Select the "BACK-LIT" item and
change the mode by pressing the
+ key or ‒ key.
＋ −
or
● "ALWAYS"：always ON
"OFF"：always OFF
"KEY-ON"：It light on after
Key operation.
Selection range：
ALWAYS, OFF, KEY-ON
Default：ALWAYS
Battery alarm voltage
① Select the "BATT ALM" item and change the
numerical value (voltage) by pressing the + key or
‒ key.
＋
or
● AA alkaline batterys ⇒ 4.2V DR
● Futaba HT5F1800B ⇒ 5.0V Ni
● Futaba FT2F2100BV2 ⇒ 5.8V Fe
Battery alarm voltage vibration
① Select the "BATT VIB" item and change the ON or
OFF by pressing the + key or ‒ key.
＋
or
● ON ⇒ The battery alarm of a transmitter is told with
vibration.
Buzzer tone
① Select the "BUZ-TONE" item and change the
numerical value (tone) by pressing the + key or ‒
key. The higher the numerical value the higher the
tone.
＋
or
■ Light-time
Select the "LIT-TIME" item and
change numerical value (time) by
pressing the + key or ‒ key.
＋
or
● It is only a case in "KEY-ON"
mode here.
Selection range：1 ∼ 30(s)
Default：10(s)
● When you want to return the set
value to the initial value, press the
+ key and ‒ key simultaneously.
−
−
−
■ Light-adjustment
S e l e c t t h e " L I T - A D J " i t e m
a n d c h a n g e n u m e r i c a l v a l u e
(brightness) by pressing the + key
or ‒ key.
−
● It is the brightest at 30.
Selection range：1 ∼ 30
● When you want to return the set
value to the initial value, press the
+ key and ‒ key simultaneously.
Selection range：
4.2V 4.6V 5.0V 5.4V 5.8V
6.2V 6.6V 7.0V 7.4V
*The voltage drop of a rechargeable battery
and a dry cell battery is different. When
using a rechargeable battery, always
change the voltage.
Selection range：
ON, OFF
Selection range：
OFF, 1 ∼ 100
● When you want to return the
set value to the initial value,
p r e s s t h e + k e y a n d ‒ k e y
simultaneously.
＋ −
or
Default：15
65