Touch Panel - Toshiba E-STUDIO45 Operator's Manual

1. DESCRIPTION OF THE DIGITAL COPIER AND THE OPTIONAL EQUIPMENT (Cont.)

Touch Panel

The functions currently selected and used, and the copier's status are displayed on the touch panel.
1
When a graphic symbol blinks, rectify the problem referring to "7. When graphic symbols blink on the
touch panel" in the Operator's Manual for Copying Functions.
2
3
4
Function setting area
5
6
The following information is shown here:
Copier status, operational instructions, cautionary messages,
in addition to resolution and the number of the specified remote
7 FAX.
8
The various function items shown here are touch-key select-
able. Press any key lightly with you finger.
• Index keys
Used for switching between the phone book, advanced,
9
settings and job status menu.
• Function setting area
This is where you select or set various functions.
10
Clearing and Canceling the Function Selected
If you again press any key that is highlighted, the function se-
lected is cleared. To quit (or cancel) the settings, press
11
the CANCEL key at the bottom left on the touch panel.
Tip
The key slightly shown with dots on the touch panel cannot be
12
selected.
1-6
DESCRIPTION OF THE DIGITAL COPIER
Index keys
Message Area
Touch-keys Area
Message area
Touch-keys area