Setting Rx Printing - Toshiba E-STUDIO45 Operator's Manual

Setting RX Printing

Set printer settings for when originals received on the FAX are printed.
Two print installations are available: discard printing and RX reduction printing.
• Discard Printing : ON, OFF
ON (initial setting)
OFF
* For detail of DISCARD setting, contact your service technician.
• RX Reduction Printing : ON, OFF
ON (initial setting)
OFF
* Cassettes can be set for received FAX printing only.
ing Functions
Be sure to use LD, LG, LT, LT-R, A3, A4, A4-R or B4.
1 Press SETTINGS key to display the settings menu,
then the PRINTER
2
Press the ON (or OFF ) key of the DISCARD and/
or REDUCTION, then the
• The registered items can be confirmed in the function list.
Page 5-38
: If the received original is longer than the recording paper by 10mm, the
excess data for the received original will be discarded.
: The received original is printed on two sheets of paper if its length exceeds
the paper printing area.
: If the received original is longer than the recording paper, it will be vertically
reduced to 90% to fit on the installed recording paper.
: The received original is printed on two sheets of paper if its length exceeds
the paper printing area.
key.
SET key.
Page 1-11 in the Operator's Manual for Copy-
1
2
3
4
5
6
7
8
9
10
11
12
5-27